AGPtek G36 Handbuch Seite 4

2.SSID (WiFi name): The device transmits
data via WiFi and SSID represents the name
of the device (Note: the WiFi can not be
connected to the Internet and serves only
as a bridge between the phone and the
device).
3.Password (WiFi
password required to control the device
(the password can be modified in the
background setting interface, and the initial
password is 12345678).
4.IP Address: For the implementation of
remote control by mobile phone. The IP
address must be entered into the browser
of the mobile phone to enter the interface
of backstage.
. Connect the Device to WiFi
Ⅱ
Please connect the network by pressing the
buttons (Ignore if WiFi is not available in your
house).
password):
3
The WiFi