Specifications; Replacing Filters - KLOP INNOVATIONS Pillar Benutzerhandbuch

7 Specifications

(With filter)
Manufacturer
Klop Innovations b.v.
Model
AP 700
Motor
170W
Voltage
230V AC 50Hz

8 Replacing filters

Replacement of the filters of the Aircleaner Pillar should only be carried out by
a competent person. Make sure you always know which filter(s) need to be
replaced, before you start changing the filters.
Ù
When changing the filters, always
make sure that the Aircleaner Pillar is
completely switched off! For complete
disconnection, also remove the power
cord from the socket!
8.1 Removing top plate
Undo the top plate by removing the
4 screws securing it to the Pillar with
the appropriate tool after unplugging the
power cord.
Maximum
100 - 700 m³ per hour
Weight
27,0 kg
Dimensions
440x765x470mm (WxHxD)
Sound
43 - 59 dB(A)
8.2 Removing filter
Remove the inserted filter by lifting it out
at the edges. Repeat with all filters that
need to be replaced.
EN
21 21