Werbung
-
The maximum allowable motor speed on the E60 motors is 60,000 revolutions per minute. For
safety's sake, care must be taken not to exceed this limit. When using a gearbox, take into
consideration that the motor rpm may be calculated by multiplying the propeller rpm by the
gearbox ratio.
-
Since it is possible for an electric motor to start following connection to a battery (for example
from improper operation, an electrical defect, or interference), extreme caution must be
exercised upon making this connection!
-
Electric motors have the potential to cause injury. This risk increases when the motor is rotating
a propeller that may also strike and propel other objects.
-
Hacker Brushless Motors may only be used when the potential for personal and property
damage has been eliminated.
-
A damaged motor (for example electrical, mechanical or moisture damage) may not under any
circumstances continue to be used. Doing so may result in sudden motor damage in the future.
-
Hacker Brushless Motors may only be used in an environment free from the risk of static
electrical discharges.
-
Hacker Brushless Motors may only be supplied with electricity from batteries connected to an
appropriate brushless controller (see above). The connection to a power supply is not permitted.
-
Under no circumstances a Hacker Brushless Motor should be connected to an electrical network
based on alternating current (e.g. 100-230V).
-
The use of these motors in man-carrying vehicles, whether airborne or otherwise, is not
permitted.
2. Technische Daten / Technical data
Bezeichnung / description
Artikelnummer /
item-number
Wicklungszahl / turns
Leerlaufstrom / no-load
current (A)
Innenwiderstand / internal
resistance (mOhm)
RPM/Volt / Kv
Gewicht mit Kabel /
weight incl. wires (g)
Länge / length (mm)
Durchmesser / diameter
(mm)
Befestigungslöcher /
mounting holes
Empfohlenes Timing /
recommended timing
Schaltfrequenz / switching
frequency
Typ / type
Anleitung / Manual Hacker E60 Brushless Motor
© 2016 Hacker Motor GmbH
E60-L 1Y
62100530
1
(Stern / Star)
2,4@37V
18,6
600
655
86,7
4x M4 mit 25/30mm Lochkreis / 4x M4 with 25/30mm
Boltcircle
10 - 15°
8-poliger Innenläufer / 8-pole Inrunner
E60-L 1,5D
62100516
1,5
(Dreieck / Delta)
3,2@37V
12,7
700
655
86,7
50
8 kHz
Seite 4
Werbung
