Hama 00179825 Bedienungsanleitung Seite 6

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• DVB-T Indoor Antenna
• Power supply unit
• Base
• Adhesive pad
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Children should be supervised to ensure that they do not
play with the device.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Connect the product only to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the power
cord from the socket.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
4
Warning
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the device
yourself. Leave any service work to
qualified experts.
• Do not open the device or continue to operate it if it
becomes damaged.
4. Specifications
Supply voltage
Rated power
consumption
Frequency band(s)
Connection
Ambient temperature
5. Startup and Operation
5.1 Connection
• Connect the antenna's power supply unit to a socket and
connect the antenna cable to the TV (Pic. 1a).
• If you're using an external DVB-T receiver, connect the
antenna to the socket and the DVB-T receiver (Pic. 1b).
• Connect the DVB-T receiver to the TV (observe the
operating instructions for your set-top box).
• Setting up the antenna manually allows you to optimise
the reception of the TV stations you receive.
• Depending on the reception area, the stations may be
broadcast vertically or horizontally.
• The antenna must be positioned accordingly.
5.2 Radio reception
• The antenna can also be used for FM reception.
• As most audio devices have an IEC connection, please
use a coax socket-coax socket adapter (not included).
Note
• Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.
• If the connected DVB-T receiver supplies +5 V via the
antenna output, no power supply unit is required as
the antenna can be remotely powered by the antenna
connection.
220 – 240 V AC / 50 Hz
50 mA
UHF: 470 – 790 MHz
VHF: 174 – 230 MHz
Coax plug
-20 to +40° C