Change Feed Dog Settings; Stitch Width Setting - Texi Tegra 4 Benutzerhandbuch

CHANGE FEED DOG SETTINGS

STITCH WIDTH SETTING

NOTE: TURN OFF THE POWER.
Texi Tegra 4 INSTRUKCJA 2019.indb 89 Texi Tegra 4 INSTRUKCJA 2019.indb 89
Standard hem stitching,
set change feed dog in "S"
position.
When change feed dog is in
the "S" position, the tongue
"A" is in this position. This
setting can be used for all
standard hem stitching.
Curl hem stitching & cover
stitch sewing, set change
feed dog in "R" position.
When change feed dog is in
the "R" position, the tongue
"A" is in this position. This
setting can be used for all
curl hem stitching.
Remove cloth waste box, turn
trimming width adjustment knob
(adjust range between 3.0-4.5 mm).
The width of the adjustment is
marked on the Needle plate, "R"
indicates the trimming width at curl
hem stitching.
Note: If the looper cover is
opened, it is easier to adjust the
trimming width.
Texi Tegra 4
EN
89
18.09.2020 09:42 18.09.2020 09:42