58
Typ
X3
60
600 mm
80
800 mm
Bracket
•
Insert the hob and align it.
•
From the bottom, insert the brackets with screws in
the holes provided for fastening the brackets, align the
brackets and screw them tight.
•
Tighten the screws with a hand screw driver only; do
not use a battery-operated screw driver.
•
In the case of thin worktops make sure that the
brackets are correctly positioned.
34
Instructions for assembly
X2
560 mm
750 mm
X2
Important:
There is a risk of breakage if the hob is canted or
subjected to stress during installation!
Minimum distance to adjacent walls
Cut-out dimension
Outer dimensions of the hob
Cable routing in rear wall
Installation height
GB