Airodesign IKT-604 STDC CEC Gebrauchs- Und Montageanweisung Seite 22

• If the hob cannot be switched
off due to a defect in the sensor
control immediately disconnect
your appliance and call Customer
Service.
• Take care when working with
home appliances! Connection
cables must not come into
contact with hot cooking zones.
• Risk of fi re: never store items on
the hob.
• The glass ceramic hob should not
be used as a storage area.
• Do not put aluminium foil or
plastic onto the cooking zones.
Keep everything which could
melt, such as plastics, foil and in
particular sugar and sugary foods
away from hot cooking zones.
Use a special glass scraper to
immediately remove any sugar
from the ceramic hob (when
it is still hot) in order to avoid
damaging the hob.
• Metal items (pots and pans,
cutlery, etc.) must never be put
down on the induction hob since
they may become hot. Risk of
burning!
• Do not place combustible,
infl ammable or heat deformable
objects directly underneath the
hob.
22
Safety Instructions and Warnings
• Metal items worn on your body
may become hot in the immediate
vicinity of the induction hob.
Caution! Risk of burns! Non-
magnetisable objects (e.g. gold or
silver rings) are not aff ected.
• Never use the cooking zones to
heat up unopened tins of food
or packaging made of material
compounds. The power supply
may cause them to burst!
• Keep the sensor keys clean since
the appliance may consider dirt
to be fi nger contact. Never put
anything (pans, tea towels etc.)
onto the sensor keys!
• If food boils over onto the sensor
keys, we advise you to activate
the OFF key.
• Hot pans and pots should not
cover resp. be moved to close to
the sensor keys, since this will
cause the appliance to switch off
automatically.
• Place the pan as close to the
centre of the cooking zone as
possible.
• Whenever possible, use the
back cooking zones for large
pans so that the sensor keys
are not heated up too much
(touch control overheating; error
messages Fc, Ft or FE, touch
control cut off ).
GB