Washing Instructions - Axkid Connect Bedienungsanleitung

EN
About Axkid Connect
The safety pad Axkid Connect assists parents to keep their child safe in the car seat. You
will receive alerts to your connected phone when one of the following unsafe situation
occurs: - Temperature is too high in the car. - You have forgot your child in the car. - Your
child has been seated too long in the car seat.
Use
Axkid Connect can be installed in any car seat. Install Axkid Connect in the car seat and
push the buckle through the buckle hole (D). To function properly, Axkid Connect must
be placed in the child car seat and interact with your phone. You first need to download
the app, you will find the ' A xkid Connect' app on App Store and Google Play. To pair
your phone to the safety pad, follow the instructions in the app. Firmly press down on
the safety pad for a couple of seconds and then release,. the Axkid app will detect your
safety pad and pair it with your phone. You will find all necessary information about
Maintenance, Warranty, Storage, transport, and Faults in the app or online.
Charge Axkid Connect
The battery status of the Connect is shown in the app - make sure you check the status
here regularly. Axkid Connect has a built-in rechargeable battery that lasts for approxi-
mately 6 months at normal use. Recharge the pad with the supplied USB-C cable (E).
The LED light (F) indicates charging status: Red – charging, Green – fully charged.

Washing instructions

Never wash the electronics in Axkid Connect, note that the foam pad (B) inside contains
electronics. Only wash the outer textile cover, this can be removed, and machine
washed gentle at 30º C, do not - bleach, tumble dry, dry clean or iron. When reinstall
the foam pad (B) have "this side up" facing the top side of the textile cover (A) (side with
Axkid logo).
30
Textile cover: 100% Polyester.
Warranty: For more information please visit www.axkid.com.