Transport, Storage - DALAP TRR 1.5 Benutzerhandbuch

Application
TRR controllers are designed for speed control of single-phase fan motors. They can also be used
to control the temperature of heaters .
Precautions
The controller can only be set by a qualified electrician.
Setting the controller under voltage can lead to electric shock. current.
The maximum constant current in the receiver shall not exceed the current value for which the
controller is intendedfor the appropriate level of control.

Transport, storage

The original packaging of the manufacturer ensures safe transport and storage of the controller.
Only the original packaging should be used during storage.
Storage in temperatures from -5°C to +50°C.
Technical data (Electrical parameters)
Type U
PRI
[V]
TRR 0.5 230
TRR 1.2 230
TRR 1.5/1 230
TRR 2.0/2 230
TRR 2.0/1 230
TRR 3.0/1 230
TRR 3.0/2 230
Other technical parameters
Degree of protection
Ambient temperature
Security
Compliance with the standard
Insulation class
ENG
Settings levels U
1 2
110/0,5 170/0,5
115/0,9 135/1,0
115/1,5 135/1,5
65/0,9 110/1,5
115/1,1 135/1,5
115/2,2 135/2,5
70/1,5 85/1,8
IP30-TRR1.2; TRR 1.5/1; IP54 -TRR 2.0/2, TRR 3.0/1, TRR 3.0/2
up to 40°C
to
Resistance intermitary
PN-EN61558-2-13
II + measures ensuring continuity of PE circuits
[V] / I [A]
R R
3 4
230/0,5
155/1,1 180/1,2
155/1,5 180/1,5
135/1,7 170/2,0
155/1,7 180/2,0
155/2,8 180/3,0
105/2,2 145/2,7
overload
- automatic heat switch
Connector type
5
TLZ4
230/1,2 TLZ4
230/1,5 TLZ4
230/2,0 TLZ4
230/2,0 TLZ4
230/3,0 TLZ4
230/3,0 TLZ4