Troubleshooting - Madison MAD1000 Bedienungsanleitung

Bluetooth Pairing Procedure
•
Turn the input selector to BT position. The blue LED will flash. Activate the
Bluetooth function in your equipment (such as mobile phone), search for
Bluetooth equipment, the Bluetooth name is "AMPLIFIER". Pair your mobile to
"AMPLIFIER" and connect it (blue LED will stay bright), then play your music.
•
By NFC function: Turn the input select to BT position, turn on your Bluetooth
equipment NFC function, then put your equipment ( such as mobile) close to the
NFC symbol on the front panel, then it is ok.
Trouble-shooting
If the amplifier doesn't operate properly, check the points in the table below. If this
doesn't solve the problem, please contact your dealer.
Problem
• Bad speaker connection
• Wrong connection of audio
No sound
• Bad connection of power plug
• Volume turned down to the
• Speaker output selector not in
©Copyright LOTRONIC 2013
Causes
input socket
minimum
Solution
• Connect securely
• Check the audio input socket
• Connect the power cable
properly
• Turn the volume up to a
suitable level
4