Deuba monzana DBHK010 Anleitung Seite 19

The flame effect can be also used regardless of the heating function. The use
•
of the flame effect only requires only very little energy.
7.& 8. Plus and Minus Buttons
Plus and deficit function for the time setting and temperature.
•
Only on the remote control available.
•
9.Adjusting the Brightness
Press the Brightness button on the remote control to change the Fuel bed
•
color between the 3 settings: High, Middle and Low. Indicated by the second
digit on the Floating Display changing to show
"H": high
"C": middle
"L": low
Operation continued by remote controll only
10.Setting the Time & Day (24 Hour Clock)
1.Press the Power button to turn the unit on.
2.Press & hold the Time Setting button for two seconds to display the time &
day-see Fig 9 (no numbers shown as time not set).
3.Press the Time Setting button & the day setting will flash - see Fig 10.
4.Adjust the day setting using the Temp + & Temp - buttons.
5.Press the Time Setting button & the hour setting will flash. Adjust the hour
setting using the Temp + & Temp - buttons.
6.Press the Time Setting button & the minute setting will flash. Adjust the
minute setting using the Temp + & Temp - buttons.
7.Press the Time Setting button to set the time & exit the time/date set-up.
10. Setting the Weekly Timer
The Timer allows for two ON/OFF periods (M1/M2) for each day of the week
and the timer can be set using the following procedure:
1.Press the Power button to turn the unit on.
2.Press & hold the Timer Mode button M for two seconds to enter the timer
settings. The settings for the 1st ON/OFF period (M1) for Monday will be shown
with the 1st ON time & hour setting flashing - see Fig 11.
www.DeubaXXL.de
19