Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER'S MANUAL
USB MICROPHONE
Dynamic USB microphone
M-20 USB
The
was designed for digital recordings at the computer. The
additional drivers and is compatible with PC and Mac. The microphone gets its power from the computer
through the USB cable.
Plugs in directly to any computer with a USB port for digital recordings
Compatible with PC and Mac
No driver installation required, the
Cardioid pickup pattern for effective feedback elimination
Encapsulation against the build-up of static charge
Well-balanced frequency range for natural sound
On/off sliding switch
Power supply via USB
Ideal for podcasters, musicians, journalists and anyone requiring recordings for websites or
multimedia presentations
Excellent quality at a low price
Cable with USB connector and stand included
Safety Instructions
Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is
used for other purposes than originally intended or if it is not correctly connected, the product may
suffer damages and the guarantee becomes void.
Protect the device against humidity and heat. The ambient temperature must always be between
-5° C and +45° C. The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
Installation
USB port computer
Use the USB cable to connect the
sliding switch to "ON" to switch on the microphone. As soon as the
computer, it is recognized as generic USB device and is automatically installed. No additional drivers
are required.
Windows 98 SE/ ME/ 2000/ XP/ Vista
You can confirm correct installation by opening the "Sounds and Audio Devices" section of the
Windows Control Panel. In the "Audio" tab, the
(SSS USB Headphone Set is indicated) under "Sound playback" and "Sound recording". In the
M-20 USB
"Voice" tab, the
indicated) under "Voice playback" and "Voice recording".
Mac OS 9, OS X
You can confirm correct installation by opening the "Audio" section of your computer's System
M-20 USB
Preferences. The
"Input" and "Output" tabs.
Set up the microphone stand and insert the
© Copyright
Nachdruck verboten!
Reproduction prohibited!
M-20 USB
M-20 USB
is identified automatically
USB connector M-20 USB
M-20 USB
to a computer with available USB port and set the
M-20 USB
M-20 USB
should be selected as default device
should be selected as default device ("SSS USB Headphone Set" is
should be selected ("SSS USB Headphone Set" is indicated) in the
M-20 USB
from above.
does not require
Cleaning and Maintenance
For cleaning the microphone only use a soft lint-free and moistened cloth. Make sure not to allow any
water to enter the device and never use any solvent cleansers.
Technical Specifications
Type:...................................Dynamic (moving coil)
Directivity pattern: ...............Cardiodid
Frequency range:................50-14,000 Hz
Impedance:.........................600
Sensitivity: ..........................-53 dB (±3 dB)
Connector:..........................USB (type A)
Power supply: .....................USB port
Dimensions:........................182 x 49 mm
Weight: ...............................200 g
Required operating system:
Windows 98 SE/ ME/ 2000/ XP/ Vista
MAC OS 9 / OS X
is connected to a
[dB ]
40
-
50
-
60
-
70
-
80
-
90
-
20
Please note: Every information is subject to change without prior notice. 20.06.2008 ©
Delivery Includes
M-20 USB
Dynamic microphone
USB cable
Microphone stand
W
50
100
200
500
1k
2 k
5 k
10 k
20 k [Hz]
frequency response (cardiodid)
polar patter (cardiodid) at 1 kHz
www.omnitronic.com
M-20 USB
13000418_V_1_0.DOC
Werbung
