Symantec S450 Serie Handbuch Seite 26

Installing the Slide Rails
The slide-rail mounting kit included with the S450 allows it to be rack-mounted in a two- or four-post
equipment rack. The kit provides tool-less racking for 4-post racks and allows the appliance to be installed
or removed from either the front or rear of the rack.

Note: The following procedure documents how to install the appliance in a four-post equipment
rack. For comprehensive information on rack-mounting the appliance, including other
configurations, see the S-Series WebGuide at:
!
Caution: Before rack-mounting the appliance:
•
Power off the appliance and disconnect all cables.
•
Verify that the weight of the system does not exceed the rack's fully populated weight limit. For
more information, refer to the manufacturer's instructions included with the rack.
•
For weight stability, load the rack from the bottom up.
•
Observe the warnings in "Safety Instructions" on page 11.
•
Take adequate safety and grounding measures to avoid creating an electrical shock hazard and to
prevent bodily injury.
•
The appliance is very heavy. A two-person lift or mechanical aid is recommended to lift the
appliance from the carton and install it in the rack.
•
Do not place objects on the appliance or use it as a work surface. Its mounting hardware does not
support additional weight.
Chapter 3 English Instructions
http://www.symantec.com/docs/DOC9795
26