Get Started - Anjou AJ-ADA007 Bedienungsanleitung

BEFORE USING THE DIFFUSER
1. Unpack the product and check the completeness of the accessories.
2. Check whether [12] the mist tube, the valve on [13] the water outlet, the [14] muting cover, and the [15]
essential oil bottle holder are well installed.
3. Unpack the essential oil bottles and check if any leakage occurs.
N
1. Connect the unit to a power source via the included power
adapter. All the LED indicators will flash for one second.
MAX
3. Remove the water tank and uncover its lid, add water into the tank no
higher than the max water level line. Do not add water into the mist tube.
05

GET STARTED

2. Screw the essential oil bottle onto the essential oil bottle holder.
4. Place the tank back onto the base. The diffuser is ready for use now.
ESSENTIAL OIL BOTTLE STOPPER REPLACEMENT
1. Unscrew the cap, clamp the stopper neck with the
tweezer and take out the COMMONLY USED
STOPPER.
3. Screw the essential oil bottle onto the holder.
2. Fix the LUNA STOPPER on the bottleneck, align
the stopper top with the tweezer and press to
plug in the Luna stopper.
Note:
・When using other essential oils of
relatively stronger corrosivity (e.g.,
Eucalyptus, Clove, etc.) or higher density
(e.g., Cinnamon, Sandalwood, etc.), please
replace with caution as such essential
oils may affect the output of essential oil.
・The Luna stopper is intended for single
use only. Repeated use may cause oil
leakage.
06