Fixture Assembly & Installation; Connecting The Led Fixture To The Mains - Lumatek ATS200W LED Bedienungsanleitung

6.1 Fixture assembly & installation
Warning! Mount the system to something that can hold the weight of the LED fixture.
Attach the metal cable hangers to the mounting hooks on top of fixture. Hang the fixture in required position
and height. For optimal performance; position fixture 40cm – 60cm above plant canopy. Ensure the fixture is
hung horizontally.

6.2 Connecting the LED fixture to the mains

Warning! Make sure mains power is switched off.
Warning! Ensure the power supply cable is not coiled and does not touch any hot surfaces.
Warning! Connect the cables according to local rules, safety regulations and electrical code.
Warning! Ensure external switching gear can cope with the inrush current of the LED fixture. Always use a
double pole contactor suitable for switching a capacitive load. Never use household timers to switch the LED
fixture! Insert power supply cable IEC into power supply IEC socket on driver. Connect to switching gear/
power supply. Switch on mains power.
Warning! Do not connect or disconnect the LED fixture under load.
Connect power
supply to fixture.
Attach metal
cable hangers to
mounting hooks