Renkforce 2249726 Bedienungsanleitung Seite 3

Operating instructions
USB-C™ 15-in-1 dock 87 W laptop docking station
Item no. 2249726
Intended use
The product is designed for connection to a computer or smartphone with a USB-C™ interface in order to
provide additional interfaces. It is especially suitable for MacBook computers as a full expansion option. The
power adapter enclosed is used to supply the power.
a) External graphics card: You can connect up to three HDMI devices and one VGA monitor. This will give
your computer additional monitor connections.
b) External network adapter: A network connection can be established, e.g. if the computer does not have
a network connection.
c) External USB hub: An integrated USB3.0/3.1 hub with 4 ports provides additional USB ports, e.g. for a
USB mouse or USB keyboard. One of the USB-C™ ports also serves as a separate USB power outlet that
can be used to charge appropriate devices (e.g. smartphone or tablet, etc.) with the appropriate connection.
d) External sound card: A stereo jack socket (3.5 mm, for headphones and/or microphone) is used to connect
analogue audio devices, e.g. a headset.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a ba-
throom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards
such as a short circuit or fire. Read the operating instructions carefully and store them in a safe place. Only
make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names
contained herein are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• Docking station • Power adapter
• 2x USB cable (USB-C™ to USB-C™) • Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g. due to
an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become damp or wet,
as this may cause a fatal electric shock!
This symbol indicates that this product is built according to protection class II. It is equipped with
reinforced or dual insulation between the mains circuit and the output voltage.
This product has been CE tested and therefore complies with the necessary national and Euro-
pean regulations.
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety information and information on proper handling in these operating instructions,
we will assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may damage the
product.
• Consult a technician if you are not sure how to use or connect the product, or if you have
concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Connected devices
• Always observe the safety information and operating instructions of any other devices which
are connected to the product.
c) Electrical safety
• The mains outlet must be located near to the device and be easily accessible.
• Only power the product using the power adapter provided.
• Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable; always use
the grips on the plug.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• Do not touch the power adapter if there are any signs of damage, as this may cause a fa-
tal electric shock! Switch off the mains voltage to the socket containing the power adapter
(switch off the corresponding circuit breaker or remove the safety fuse, and then switch off
the corresponding RCD protective switch). You can then unplug the power adapter from the
mains socket. Dispose of the faulty power adapter in an environmentally friendly manner and
discontinue its use. Replace it with a power adapter of the same design.
d) Persons and product
• Never pour liquids over electrical devices or place objects filled with liquid next to the device.
If liquid or a foreign object enters the interior of the device nevertheless, first power down the
respective mains socket (e.g. switch off the circuit breaker) and then pull the mains plug from
the mains socket. Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into a warm
one. This may cause condensation to form, which can destroy the product. Allow the product
to reach room temperature before connecting it and putting it into use. This may take several
hours.
• When setting up the product, ensure that the cables are not pinched, kinked or damaged by
sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses
a risk of injury.
Controls
1
2
6
8
10
11
13
14
15
1 LED indicator (mains operation)
2 3.5 mm jack socket
3 USB-A connection
4 USB-C™ connection
5 USB-A connection
3
6 HDMI connection
4
7 USB-C™(IN) connection
5
8 HDMI connection
9 HDMI connection
10 VGA connection
7
11 USB-A connection
9
12 USB-A connection
13 USB-C™ (PD3.0) connection
12
14 USB-C™ (IN) connection
15 Low-voltage socket
16
16 Ethernet port