Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product description
LED Indicator
Power supply
ON/OFF switch
Reset
Press the Reset / Pair button for 6 seconds to restore the default settings.
Pairing
Press the Reset / Pair button for 1-2 seconds to pair another mesh device.
Note: Mesh network systems supports up to 10 mesh devices.
Default parameters:
Default IP: 192.168.10.1
Login: http://ap.setup
Login password: admin
SSID: MeshGo_XXXX
Touchlink SSID: MeshGo_Touch
Option 1: Wireless Backhaul
1. Connect one of the mesh devices to the internet as a mesh router.
2. Once the mesh router is set up, plug in the other mesh devices. They will
switch to "Extender mode" , automatically paired with the router mode
mesh.
User manual
Reset/Pair button
Touchlink sensing pad
Ethernet port 10/100Mbps
Gigabit Ethernet ports
2
Werbung
Inhaltsverzeichnis
