Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 17
WARNINGS
SAVE THESE INSTRUCTIONS
This appliance is for household use only. No user-serviceable parts inside.
Return the appliance to the nearest authorized service center for examina-
tion, repair or adjustment.

GENERAL FEATURES

1.
Waterproof cover
2.
Cup cover/drinking spout
3.
Cup (600ml)x2
4.
Cup base
5.
Blender body
6.
On/off button
IN THE BOX
-
1 x blender body
-
1 x cup base with blades
-
2 x AS cups of 600ml
-
2 x cup covers/drinking spout
-
1 x Instruction manual.
ASSEMBLING AND DISMANTLING THE APPLIANCE
-
Before you begin to assemble or disassemble the appliance, make sure the motor unit (5) is turned off
and unplugged from the wall outlet and the rotating parts are not in motion.
-
Assembling and dismantling the blending container:
-
Turn blending container (3) so that its neck points upward.
-
Place the blade unit (4) against the neck of container (3) so that the blades point into the contai-
ner (3).
-
Screw the blade unit (4) onto the neck of container (3).
-
Turn the assembled container with the blade unit (4) downward.
Note: Put food and liquids into container (3) before you attach the blade unit to it (4).
-
To dismantle, proceed in the opposite order.
-
Attaching and removing the blending container from the motor unit:
-
Place the motor unit (5) on a flat, dry surface,s uch as a kitchen counter.
-
Place the the blending container on the motor unit (5) so that the arrow indicator on the blade
unit (4) lines up with the arrow on the motor unit (5).
-
Turn the blending unit clockwise until it attaches firmly to the motor unit (5). If the blending
container assembly is correctly attached to the motor unit (5), it cannot be lifted separately.
-
To remove the blending container from the motor unit (5), proceed in the opposite sequence
-
Assembling the drinking bottle
-
To assemble the drinking bottle, screw the cup cover (2) onto the neck of bottle (3).
-
Firmly tighten the cup cover (2). When carrying, make sure the spout is properly closed, so that
the bottle's contents do not spill.
USE
-
Make sure that all the product's packaging has been removed.
-
Before using the product for the first time, clean the parts that will come into contact with food in
the manner described in the cleaning section.
-
Unroll the cable completely before plugging it in.
-
Make sure that the motor unit (5) is turned off and unplugged.
-
Put the ingredients you want to mix into blending container (3). Containers (3) can hold food up to the
600 ml. Do not put more food and liquid into container.
Warning: Before pouring hot liquids into blending containers (3) and blending them, let
them cool to at least 40°C.
-
Assemble the blending container and then attach the blending container assembly to the motor unit
(5) according to the instructions in the chapter "Assembling and dismantling the appliance".
-
Plug the power cable in and press the pulse switch (6) to start the smoothie maker. Press and hold
switch (6) for as long as you want to mix. To turn the smoothie blender off, just stop pushin on switch (6).
-
Warning: The maximum operating time is 2 minutes. Do not let the appliance run continuously longer
than the time indicated above. Then let the appliance cool for 2 minutes. When processing thicker
- 4 -
1
2
3
4
5
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis