Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
MicroSD card reader
Item No. 2203084
Intended Use
The product can be connected to a USB port of a computer. It is designed to read and write
corresponding memory cards.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Card reader
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
Operation
a) Connection
Insert a MicroSD-/MicroSDHC memory card in to the slot of the card reader (observe the right
orientation, do no use force while inserting!). Switch on your PC and wait until the operating
system has finished loading.
Connect the card reader to a free USB port of your computer. All drivers are already contained
in Windows (a miniumum of Windows XP is required). Windows automatically allocates an
additional drive letter.
b) Disconnecting the Card Reader
If there is any read/write access on the memory card, wait until it is finished. Then disconnect
the card reader with the memory card from the USB port.
If the memory card is extracted during a read/write access, the data on the memory
card can be damaged; the memory card will more than likely have to be reformatted
after that.
c) Reading/recording memory cards
The memory card is integrated in the same manner like a conventional removable media drive.
In the Windows file manager you can now readout the data of the memory card (or file data onto
the memory card), just like you use the hard disk or an USB stick.
Care and Cleaning
• Disconnect the product from the mains before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical Data
Operating voltage ......................... 2.7 – 3.6 V/DC (via USB)
USB standard ............................... 2.0 / 1.1
Transfer rate ................................. 480 Mbit (60 MB)/s
Supported memory cards ............. microSD / microSDHC / microSDXC / SDXC, up to 8 GB
Supported operating systems ....... Windows
Pro, with SP1, SP2, SP3), only 32 bit, Vista™ (32/64 bit),
7 (32/64 bit), 8, 8 Pro, Windows
Mac OS X 10.5.1, Mac OS X 10.9, OS X Mountain Lion
Operating temperature ................. 0 to +60 °C
Dimensions (L x W x H) ................ 32.5 x 15.5 x 7.5 mm
Weight .......................................... 4.5 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
ME, Windows
2000, Windows
XP (Home,
®
®
®
Enterprise, Windows
®
*2203084_V1_0120_02_mxs_m_en
RT
®
Werbung
