Herunterladen Diese Seite drucken

Renkforce 1299304 Bedienungsanleitung Seite 2

Usb2.0-otg-kartenleser

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating instructions
USB2.0 OTG card reader
Item no. 1299304
Intended use
This product is a portable card reader for reading and writing to digital memory cards. It is
designed to be connected to a compatible Android device or a computer.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Card reader
• Adapter (Micro USB to USB-A)
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children.
• Do not leave packaging material lying around carelessly. These may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms,
must be avoided under all circumstances.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Important
• No drivers are required.
• Status indicator: Constant when in standby mode and flashes when data is being transferred.
• Pay attention to the information on using peripheral devices in the operating instructions for the
computer/Android devices which you connect to the card reader.
• SDXC cards use the exFAT file system. An update is required for Windows
available on the Microsoft website.
• The capacity of the memory card must not exceed 32 GB for Android devices.
• Depending on the operating system, not all memory card types/systems (e.g. NTFS, exFAT) are
supported.
• Never disconnect the card reader or remove a card when data is being transferred. Data may
be lost or become corrupted.
• The memory card must be ejected from the device before removing to prevent data loss, data
corruption or damage to the product. Refer to the instructions for your operating system.
Cleaning
• Disconnect the product from the computer/Android device before cleaning.
• Do not immerse the product in water.
• Use a dry, lint-free cloth to clean the product.
• Do not use any abrasive or chemical cleaning products.
Connection
1
Android can only read/write to one card at the same time.
Card slots
Compatible memory cards
SD
(max. 128 GB)
microSD
(max. 64 GB)
MMC
CF
(max. 128 GB)
MS
Other
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
XP, which is
®
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply ......................... 5 V/DC (via USB), max. 500 mA
Transmission rate .................. max. 480 Mbps
System requirements ........... Windows
Cable length ........................... approx. 12 cm (without connector)
Operating conditions ............ 0 to +60 ºC, 20 – 80 % RH
Storage conditions................ -20 to +60 ºC, 10 – 95 % RH
Dimensions (W x H x D)........ 101 x 27 x 15 mm
Weight ..................................... 29 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
3
RS-MMC SD/SDHC
XD/M-XD/H-XD
microSD
MD / CF I/II
SD, SDHC, SDXC, EXTREME SD, EXTREME III SD, ULTRA SD, ULTRA II SD,
ULTRA II SD PLUS, SD-ULTRA-X, ULTRA SPEED SD, SD PRO,
SD ELITE PRO, HS SD
MICRO SD, MICRO SDHC, MICRO SDXC
MMC, MMC 4.0, MMC 4.2, HS MMC, HS RS MMC, RS MMC, RS MMC 4.0,
MMC MOBILE, MMC PLUS (with adapter for MINI SD, HS MINI SD, MMC
MICRO)
CF I, CF II, CF 3.0, EXTREME III CF, EXTREME CF, ULTRA II CF, HS CF, XS-XS
CF, CF ELITE PRO, CF PRO, CF PRO II, CF4
MSHG (max. 32 GB), MS PRO, MS PRO DUO, MS MG, MS MG DUO, MS MG
PRO, MS MG PRO DUO/ HS MS PRO, HS MS MG PRO, HS MS MG PRO DUO,
HS MS PRO DUO, EXTREM MS PRO, MS SELECT
M2 (max. 16 GB), xD (max. 2 GB), xD 1.21
XP (32 bit, with SP 1, 2, 3), Vista™ (32/64 bit), 7 (32/64 bit),
®
8, 8 Pro, 8.1, Mac OSX ≥ 10.5, Android ≥ 4.0 with OTG support
2
MS / MSPRO / M2
V1_0415_02_JH

Werbung

loading