BASETech BN-S11 Bedienungsanleitung Seite 2

Operating Instructions
BN-S11 Optical USB Mouse
Item No. 2245865
Intended use
This product is intended for connection to a computer with a USB port and is designed to oper-
ate the operating system.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can result in short circuits, fires or other hazards. Read the instruc-
tions carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse • Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dan-
gerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) LED light
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Connection and operation
• Connect the mouse's USB plug to a free USB port on your computer (your computer need
not be turned off for this step).
• The operating system recognizes new hardware and installs the necessary drivers auto-
matically; they are part of the operating system.
• Place the mouse on a flat, even surface of sufficient size.
The USB mouse's optical movement detection will not work on all surfaces. No
operation is possible on reflective surfaces or glass. If you experience any difficulty
moving the mouse pointer, use a suitable mouse pad.
If after an extended period of disuse the mouse pointer can no longer be moved
correctly, check the sensor beneath the mouse to see if it is dirty.
Clean it by blowing on it briefly or use a soft, clean brush.
• Do not let the mouse cable rub on sharp corners. Do not bend it.
• Some settings such as mouse pointer speed can be made directly in your operating system
settings.
Care and cleaning
• The product is maintenance-free, do not dismantle it.
• Clean the exterior of the product using a clean, soft, dry cloth only. To remove tougher
stains, slightly dampen the cloth with water or use a suitable plastic cleaner. Do not use
any aggressive cleaning agents or chemical solutions as these may damage the housing
causing discoloration and/or malfunction.
• Use a soft, clean brush to remove dust from the sensor beneath the mouse from time to
time.
• The glide surfaces beneath the mouse may collect dirt over time, making the mouse harder
to move across surfaces. Thoroughly clean the glide surfaces.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the house-
hold waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the envi-
ronment.
Technical data
Connection ................................... USB 2.0, 5 V/DC, 500 mA
Cable length ................................. approx. 150 cm
Type .............................................. 3-button mouse with scroll wheel
Motion detection ........................... optical sensor
Configuration ................................ symmetrical, suitable for use by left- and right-handed
persons
Resolution ..................................... 1000 dpi
Operating conditions ..................... -5 to +50 °C, 10 – 85 % relative humidity
(non-condensing)
Storage conditions ........................ -10 to +50 °C, 10 – 95 % relative humidity
(non-condensing)
Dimensions (L x W x H) ................ 108 x 60.5 x 37.5 mm
Weight .......................................... 82 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2245865_v1_0420_02_jh_m_en_(1)