Simons Voss Technologies ST20.080070 Kurzanleitung Seite 38

7. Battery management
4. Remove the battery.
5. Remove all other batteries in the same way.
NOTE
All batteries are discharged approximately the same. Therefore, replace
all batteries at the same time.
6. Insert the new batteries with the positive terminal facing upwards
7. Carefully hook the battery clips back into the circuit board.
8. Replace the cover.
9. Press the cover against the base plate and screw the cover back in
9
38 / 148
(Murata, Panasonic or Varta CR2032 (3V) batteries).
place.
Batteries are replaced.
PinCode-Terminal
EN