Safety Advice And Warnings; Sterilization Function - Taurus Healthcare Everyday Purity Handbuch

English
UV Sterilizer
Everyday Purity
Dear customer,
Many thanks for choosing to purchase a Taurus
brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long
product life can be assured.
Read these instructions carefully before
switching on the appliance and keep them for
future reference. Failure to follow and observe
these instructions could lead to an accident.
SAFETY ADVICE AND
WARNINGS
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have
been given supervision or
instruction concerning use of the
appliance in a safe way and
understand the hazards
involved.
This appliance is not a toy.
Children should be supervised
to ensure that they do not play
with the appliance.
This appliance is for household
use only, not professional,
industrial use.
Don't open the item while using it in
sterilization mode. UV light can
harm your eyes. Turn off before
opening the lid.
Keep the appliance far from flame,
water and corrosive chemicals.
Do not clean the unit with organic
solvent.
SERVICE
Any misuse or failure to follow the instructions for
use renders the guarantee and the
manufacturer's liability null and void.
DESCRIPTION
1. Sterilization function button / OFF (5 sec.)
2. Aroma function button
3. Progress light bar
4. USB interface
5. USB internal charging port
6. Aroma cavity
7. UV lamps
8. Internal cavity

STERILIZATION FUNCTION

1. Connect the micro USB to a compatible power
source to turn on the unit, once connected,
buttons on the front will light up.
2. Place the item to be sterilized into the unit
cavity.
3. Press the sterilization button on the front to
begin " ".
4. The progress lights will light up when
sterilization is 25%, 50%, 75% and 100%
completed.
NOTE: The sterilization process takes 10
minutes.
AROMA FUNCTION
To use this appliance as and aroma diffuser,
follow the next steps:
1. Connect the micro USB to a compatible power
source to turn on the unit, once connected,
buttons on the front will light up.
2. Drop preferred aroma into the diffuser inlet (3
to 5 drops).
3. Place the items into the unit cavity.
4. Press aroma button "
NOTE: aroma function does not work while the
sanitizer is in sterilization or charging mode.
".