Cleaning And Maintenance - AmazonBasics EK3211 Handbuch

When the total sum of all items on scale > 4% of scale's
maximum weight capacity, the Tare function is used.
(4%=80 g when capacity is 2000 g; 200 g when capacity is
5000 g) The Tare function is active once the T icon appears
on the upper left corner of the LCD screen.
Under this condition:
By pressing , you can see the total weight of all loads
on the scale. If you want to weigh more loads,just press
to reset LCD reading to '0' again.
Auto shut off
Auto shut-off occurs if display shows
'0' or shows the same weight reading for
2mins 15sec
2 minutes and 15 seconds.
Manual shut off
To maximize battery life, press
hold for 3 seconds to turn off the scale
when you're done using it.
Warning indicators
1. Low batteries. Replace with
1.
2. Maximum weight capacity (11 lb, 5000 g)
2.

Cleaning and Maintenance

• Clean the scale with a slightly damp cloth. DO NOT
immerse the scale in water or use chemical / abrasive
cleaning agents.
new batteries.
has been exceeded. Remove items to
prevent damage to scale.
and
EN
9