Getting Started; Function And Operation - V7 HB800ANC Handbuch

Getting Started

1. Package Includes: Headphones, Storage Bag, USB-C Charge Cable, 3.5mm Aux Cable
2. Charge the battery: Connect the USB cable to the Type-C port and the other end to
a USB charger or USB port. The charging LED will display RED while charging and
then turn GREEN when the headphones are fully charged.
3. After charging, power on the headset. Press and hold the power button for 5
seconds to enter pairing mode. Be sure to enable Bluetooth on your phone, tablet
or PC and select "V7 HB800" The headphones will report "connected" and are now
ready for use.

Function and Operation

Feature
Power on
Power off
Pairing &
Connection
Feature
Pairing mode
Pair Successful
Device Status
Power off
Power on
Device Status
Power off
Pairing
Operation Details
Press and When off, press and hold the
hold the power button for 3 seconds and
power button the headphones will turn on,
for 3 seconds. with the audio prompt "Power
on". The blue LED light will flash.
Press and When on, press and hold the
hold the power button for 4 seconds and
power button the headphones will turn off,
for 4 seconds. with the audio prompt "Power
off". The red LED lights for 2
seconds then shut off.
Operation Details
Press and With power-off, press and hold
hold the the power button for 5 seconds
power button and the headphone will enter
for 5 seconds. pairing mode. The LED with
alternately flash Red and Blue.
N/A The headphones will audio
prompt "Connected", and the
Blue LED will flash slowly.