WJG FAS-4000 Bedienungsanleitung Seite 17

Arm state
Disarm state
Guard state
The menu's items one by one:
For entering the adjustment menu press SET. Now the display shows [INPUT LEVEL]. Enter the system
password and confirm it with #.
After the input of the correct password the display shows [1. SYS, 2. ZONE, 3. REPORT, 4. STUDY].
1.Sys 2.Zone
3.Setup 4.Study
1. SYS (System Setting)
1.1. LEVEL (Changing Passwords)
1.1.1. SYS LEVEL (Change the System Password)
The display shows [INPUT SYS LEVEL].
Here enter a new six digit password and confirm it with #.
Attention: The alarm system recognizes only the last saved password. Because there is no mastercode it is
evident not to forget the system password. Without this it is impossible to make adjustment at the main unit.
1.Level
2.Code
3.Report
1.Sys
4.Delay
2. Zone
3. Setup
1. Alert
2. Home
3. Call
4. Del home
4. Study
Press
1.level
3.report 4.delay
Input sys level
******
P2008 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
1.Sys level
2.User level
1.Arm report
2.No report
01
02
Wired
03
04
05
...
12
Wireless
1.Tel
2.Dial
3.Vibrant ring
1.Remote
2.Arm zone
3.Del
2. code
530-333
1. Instant
1.Smoke
2. Delay (zone)
2.Gas
3. 24 HR
3.Panic
4.Bypass
1. Tele 1
2. Tele 2
3. Tele 3
4. Tele 4