Specifications - Monacor LEDS-5CP/RGB Bedienungsanleitung

4.2 Switching the LEDs on and off
The LEDs can be switched on with the button ON
(7) and switched off with the button OFF. If the LED
set is not used for a longer time, disconnect the
power supply from the socket because the con-
troller and the power supply unit always have a low
current consumption even with the LEDs switched
off.
4.3 Adjusting the light pattern
1) Select the desired light pattern with the numeri-
cal keys 1 to 9 (10).
2) For light patterns without automatic colour
change (Nos. 2 and 6) select the lighting colour
with the colour buttons (8). The lighting colour
corresponds to the colour of the button.
Numerical
Light pattern
key
running light with 3 LEDs
1
colours change automatically
2 constant lighting
running light with 3 LEDs and
3
colour change of red, green, blue
running light with 3 LEDs
4
colours change automatically
three-coloured
5
colours change automatically
6 running light with 3 LEDs
white
7
becoming brighter and darker
becoming brighter and darker
8
colours change automatically
9 crossfading between the colours
7 Buttons ON and OFF to switch the LEDs on
and off
8 Buttons to select the lighting colour.
The lighting colour corresponds to the colour of
the button.
9 Button "Reset": to reset the unit and to activate
the running light of numerical key 4
10 Buttons 1 – 9 to select a light pattern
11 Buttons "Slow" and "Rapide" for the speed
12 Buttons and for the brightness of the LEDs
13 Buttons "Left" and "Right" to change the running
direction.
LEDS-5CP/RGB
3) For some light patterns, the brightness of the
LEDs can be adjusted with the buttons
(12). For this purpose press the corresponding
button repeatedly.
4) Adjust the speed of the colour change or run-
ning light with the buttons "Slow" and "Rapide"
(11). For this purpose press the corresponding
button repeatedly.
5) For the running lights the running direction can
be changed with the buttons "Left" and "Right"
(13).
6) If malfunctions occur, press the button "Reset"
(9). The unit is reset and switched to the running
light of numerical key 4.
The table presents an overview of all functions.
Selecting the lighting colour
with the buttons (8)
X
X
7
8
9
®
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright © by MONACOR INTERNATIONAL. All rights reserved.
Order No. 38.5810
and
Adjusting the brightness
with the buttons (12)
X
X
X
ON OFF
1 2 3
G
4 5 6
B
7 8 9
R
W
Slow Reset Rapide
Left Right

5 Specifications

Type and number of LEDs: 270 RGB LEDs with
Beam angle: . . . . . . . . . . . . 120°
Power supply: . . . . . . . . . . . 12 V , 3 A via sup-
Ambient temperature: . . . . . 0 – 40 °C
Dimensions
LED strip: . . . . . . . . . . . . 13 × 4 × 5000 mm
controller: . . . . . . . . . . . . 78 × 30 × 53 mm
remote control: . . . . . . . . 52 × 7 × 86 mm
Power supply unit: . . . . . . 50 × 83 × 32 mm
Subject to technical modifications.
Adjusting the speed Changing the running direc-
with the buttons (11)
X
X
X
X
X
X
X
X
10
11
12
13
A-1280.99.01.11.2011
common positive
connection
plied PSU connected
to 230 V~ / 50 Hz
tion with the buttons (14)
X
X
X
X