Werbung
GB
Thank you for choosing our Romberg LED plant light, developed in cooperation with Parus and VensoEco-
solutions. Extensive inspections and tests ensure that this product operates correctly and will give the
expected service. The Romberg LED plant light delivers a full-spectrum light, an LED light adapted for
plants and photosynthesis with enhanced white and red wavelengths. It is used to enhance the growth
of all kinds of seedlings in an indoor greenhouse. The light is agreeably white and fits in well with other
domestic lighting.
General
Many of our plants come from regions of the world where the rhythm of the day and the light conditions
are quite different from those pertaining in our latitudes. Indoor growing therefore presents particular
requirements for appropriate lighting. With the right light source, you can raise herbs and plants indoors
and, furthermore, enhance the quality of the seedlings.
Technical function
The product includes a light source (LED) with wavelengths precisely adapted to the well-being of plants.
Ideal for optimal indoor plant growth!
Storage and care
Keep the product and packaging out of the reach of children. The product includes no components that
need to be replaced.
Safety instructions
Read carefully through the instructions that follow before using the LED plant light:
• The lamp is not intended for outdoor use.
• Temperature range: -10 to +40 °C
• Make sure that, during installation, your hands are dry.
• The lamp must be adequately ventilated. It must not be installed in a housing that can be sealed tight.
• The lamp must not be connected to a dimmer.
• Never look directly into the light source.
• Incorrect installation of the lamp can result in electric shock.
• When used for long periods, the lamp housing can become warm (35–50 °C).
• Do not use the lamp of it fails to work, begins to flash or only lights dimly.
• In the event of defect, switch off the lamp at once.
• Never try to repair the lamp yourself. This can lead to serious damage, invalidation of the guarantee
and to injury.
Installation
Install the product in accordance with the following instructions. Connect the power supply unit to the
product and then the mains cable to a socket or timer. It is recommended that a timer is used to set the
lighting duration, around 12–16 h for growing on seedlings.
Positioning
The product is installed on the inner side of an indoor greenhouse. The ideal ambient climatic conditions
are a temperature of 18 to 24 °C, a relative humidity of 50 % and good air circulation.
Werbung
