Boost -CUBE35LED Bedienungsanleitung Seite 4

Operation by ON/OFF button on the bottom
The Bluetooth indicator light will start flashing in blue. At first, it flashes quickly for 80 seconds and
then slowly. Activate the Bluetooth function on your mobile phone to pair it with the "color cube
BT". Once the Bluetooth is connected to your mobile phone, the Bluetooth indicator will light up
steadily.
Press the third time to turn off the light.
Press fourth, turns off the Bluetooth; The Bluetooth indicator light will be off once the Bluetooth is
off
Battery replacement (for remote control)
If remote control fails to activate the light, replace the battery.
- Press the tab on side of battery cover and then slide off the cover from
the remote control
- Take out the battery and replace a new one. Pay attention to the
polarity of battery on the cover and cover direction when installing them
back to the remote control.
Warning!
- Make sure that the battery is inserted the right way around and with the correct polarity
- Remove exhausted battery from the product
- Don't short-circuit the supply terminals
- Dispose of battery safely.
To reduce the risk of electric shock, never open the light bottom and adapter
Maintenance
- Always POWER OFF the light after use.
- Use clean water to rinse the light after use, and dry with a clean cloth.
- Store the light out of reach of children and direct sunlight.
Specifications
Adapter input ............................................................................................................ 100 – 240Vac
Output: .................................................................................................................................. 5V/2A
Speaker ................................................................... 1x 4"/10cm 10W speaker & 1x bass enhancer
LEDs .......................................................................................................................................... RGB
Working time after full charge ....................................................................................... 4 - 6 hours
Charging time ................................................................................................................. 6 - 8 hours
Bluetooth name ................................................................................................. SPEAKERLIGHTING
Bluetooth password (required by some mobile phones) ........................................................ 0000
Bluetooth range .................... 10m reception range, reduces when the battery voltage decreases
Water resistance ...................................................................................................................... IP44
Electric products must not be put into household waste. Please bring them to a
recycling centre. Ask your local authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2014
ON/OFF button: Press the button to turn on/off the light and Bluetooth.
Press the first time, to turn on the light.
The "light" function has a memory storage function (when electricity is
not exhausted), when you press the ON/OFF button, the led cube should
keep the same working model you turned off last time. When electricity is
exhausted, the memory function doesn't work. The initial mode is
"SMOOTH" mode.
Press the second time to turn on the Bluetooth function
BOOST-CUBE35LED Manual 4