Boost -CUBE35LED Bedienungsanleitung Seite 3

Operation by Remote Control
NOTE: First remove the small plastic sheet from the battery cover before operation
1.
Brightness intensity and speed button: Adjust the speed when in flash and
scrolling modes (Flash, strobe, fade and smooth). Change brightness intensity
when the light is fixed on one single color.
2. ON/OFF button: Press this button to turn on and turn off the light.
3. Bluetooth ON/OFF button: Press this button to turn on and turn off
the Bluetooth function. After one press, the Bluetooth function is activated.
The Bluetooth indicator light will start flashing in blue. At first, it flashes
quickly for 80 seconds and then slowly. Activate the Bluetooth function on
your mobile phone to pair it with the "SPEAKERLIGHTING". Once the Bluetooth
is connected to your mobile phone, the Bluetooth indicator will light up steadily. The Bluetooth
indicator light is inside the cube below the speaker. The Bluetooth indicator light goes off when the
Bluetooth is off.
Once the Bluetooth is connected, press the button again to disconnect the Bluetooth.
Only one mobile phone can be paired at the same time with the LED-CUBE.
4.
Color selection button: When the light is on, press this button to choose your favorite color as shown
on remote control (Six colors)
5.
Candle button: When the light is on, press this button to select the candle color.
6.
White color button: When the light is on, press this button to select White color.
7.
Color selection button: When the light is on, press this button to choose your favorite colors (Total 7
colors)
8. Mode select buttons:
When the light is on, press the button to select working modes.
There are 4 modes to select: Flash, Strobe, Fade and Smooth.
Flash : 7 individual colors display one by one automatically
STROBE: one color twinkling
Fade: Red, Blue and Green color scrolling automatically
Smooth: 7colors scrolling automatically
9.
Previous button: When the Bluetooth is on, press this button to select previous music.
10.
Next button: When the Bluetooth is on, press this button to select next music.
11.
Pause and Play: When the music is on, press this button to pause the music, press again, play again.
12、
Voice- and +：When the music is on, press the "-" to reduce volume, press"+" to increase volume.
©Copyright LOTRONIC 2014 BOOST-CUBE35LED Manual 3