HIKVISION DS-KH6220-LE1 Anleitung

DS-KH6220-LE1
Network Indoor Sta on
UD20147B
ENGLISH
Diagram References
1
Appearance
1 Screen Screen 2 Microphone 3 Call Bu on 4 Unlock Bu on
6 Call Center Bu on 7 Debugging Port 8 Network Interface
5 Monitor Bu on
9 Power Terminal 10 Loudspeaker 11 Alarm Terminal
Note:
The appearance of the device varies according to different models. Refers to the actual device for detailed
informa on.
The debugging port is used for debugging only.
Bu on Hold Tap
Panic Alarm Back
Unlock Remotely Direc on Key(Up and Le )
Monitor Direc on Key(Down and Right)
Call Management Center Confirm/Receive Call
2
Terminal and Wiring
AIN1: Alarm Input 1 AIN5: Alarm Input 5
AIN2: Alarm Input 2 AIN6: Alarm Input 6
AIN3: Alarm Input 3 AIN7: Alarm Input 7
AIN4: Alarm Input 4 AIN8: Alarm Input 8
GND: Grounding 12 VDC: 12 VDC Power Input
3
Installa on
It supports wall moun ng. There are two installa on modes.
Installa on Accessory Descrip on
The wall moun ng plate and junc on box are required to install the indoor sta on onto
the wall.
The dimension of junc on box should be 75 mm (width) × 75 mm (length) ×
(depth). The dimension of wall moun ng plate is shown.
Before You Start
Make sure the device in the package is in good condi on and all the assembly parts
are included.
The power supply the indoor sta on supports is 12 VDC. Please make sure your
power supply matches your indoor sta on.
Make sure all related equipments are power-off during the installa on.
Check the product specifica on for the installa on environment.
Wall Moun ng with junc on Box
1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm
(length) × 50 mm (depth).
2. Insert the junc on box to the hole chiseled on the wall.
3. Fix the wall moun ng plate to the junc on box with 2 screws.
4. Hook the indoor sta on to the wall moun ng plate ghtly by inser ng the plate
hooks into the slots on the rear panel of the indoor sta on, during which the lock catch
will be locked automa cally.
Wall Moun ng without junc on Box
1. Insert 2 expansion tubes into the wall.
2. Fix the wall moun ng plate to the junc on box with 2 screws.
3. Hook the indoor sta on to the wall moun ng plate ghtly by inser ng the plate
hooks into the slots on the rear panel of the indoor sta on, during which the lock catch
will be locked automa cally.
4
Ge ng Started
1 Ac vate Indoor Sta on
You are required to ac vate the device first by se ngs a strong password before you
can use the device.
1. Power on the device. It will enter the ac va on page automa cally.
2. Create a password and confirm it.
3. Tap OK to ac vate the indoor sta on.
2 Quick Configura on
1. Choose Language and select Next.
2. Set network parameters and select Next.
- Edit Local IP, Subnet Mask and Gateway parameters.
- Enable DHCP, the device will get network parameters automa cally.
3. Select the device type.
a. Select Indoor Sta on, and set the floor and room No. Select Next, and set the
linked main door sta on.
Note: If the main door sta on and the indoor sta on are in the same LAN, the main door sta on will be
displayed in the list. Tap the device or enter the serial No. to link.
b. Select Indoor Extension, and set the No. Select Next, and set linked indoor sta on.
Note: If the indoor extension and the indoor sta on are in the same LAN, the indoor sta on will be
displayed in the list. Tap the device or enter the serial No. to link.
4. Linked related devices and select Next.
a. Set the linked device's parameters.
b. Select the se ngs icon to pop up the Network Se ngs page.
c. Edit the network parameters of the door sta on manually or enable DHCP to get
the network parameters automa cally.
d. Select OK to save the se ngs.
5. Select Finish to save the se ngs.
Refers to Video Intercom Network Indoor Sta on Configura on Guide (Scan the QR code) for details.
Refers to Video Intercom Network Indoor Sta on Opera on Guide (Scan the QR code) for details.
1 1
3
4 5
3
50 mm
122
3
Lock Catch Lock Catch
Lock Catch Lock Catch
Rear Panel (without Interface)
7
1
2
6
11
Lock Catch
Lock Catch
Rear Panel (without Interface)
Unit : mm
Hook
Hook
Hook
Hook
Screw Wall Moun ng Plate Wall
2
8
9
10
Lock Catch
Hook
Hook
Hook
Hook
Lock Catch
Screw Wall Moun ng Plate
Scan the QR code to get the
Configura on Guide for detailed
informa on.
Junc on Box Wall
Scan the QR code to get the
Opera on Guide for detailed
informa on.