Safety Information - Multiplex Power-Multilight Bedienungsanleitung

MULTIPLEX Modellsport GmbH & Co.KG
Westliche Gewerbestraße 1
D-75015 Bretten-Gölshausen, Germany
www.multiplex-rc.de
Application
Use the lighting system POWER-MULTILight Wireless
to add realistic lighting to almost every model.
The three colors provide you with a position light, which indicates position and direction
of navigation to avoid collisions.
Since cabling is not required, subsequent installation is quick and easy.

Safety information

! Read the operating instructions carefully before initial use.
! For intended use only.
! Always comply with statutory requirements on operating model aircraft.
Operating instructions
Proper use
The lighting system POWER-MULTILight Wireless is permitted for use with model
airplanes only. Any other use is strictly prohibited.
Charging
• Use a suitable USB cable and a USB port to connect the supplied Micro USB adapter
to your PC, smartphone charger or other USB power source.
Insert the cable with the BEC connector in the POWER-MULTILight Wireless charger
socket.
Pay attention to correct polarity!
Charging starts automatically. Charging takes roughly 60 minutes for each POWER-
MULTILight.
Indicators on the Micro USB adapter:
Red LED: Battery being charged
Blue LED: Battery fully charged
• Alternatively, you can use a charger with LiPo program for one battery, charging
current < 0.1 A, end-of-charge voltage 4.2 V.
Important
If you are not planning to use POWER-MULTILights Wireless for a longer period of
time (more than 1 week), we recommend charging/discharging the batteries to a
battery voltage level of 3.75 – 3.85 V.
If POWER-MULTILight Wireless does not switch on, use the supplied Micro USB
adapter to charge the batteries. See "Charging".