Werbung
Verfügbare Sprachen
Verfügbare Sprachen
II. Basic operation
1.
Switch‐on function/laser pointer activation
Press the Switch/Power button for 3 seconds. Camera is now in the
standby mode and is ready for use. When the LED screen is on,
one of the two LED indicator lights turns green. Press briefly once
again to activate the laser pointer. You can deactivate once again
by pressing briefly. If there is no activity in the standby mode, the
screen in the standby mode will turn off after 3 minutes.
2.
System settings
Open the menu for the system settings by briefly pressing on the
"OK" button (menu button). You can select by pressing the "OK"
button and the "down/up" buttons.
Press "OK" to confirm the selection.
Loop video function:
Werbung
