Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
Quick installation guide: IB-RP101
The IB-RP101 keeps your Raspberry Pi
um/acrylic enclosure.
•
Support: Raspberry Pi
•
Airflow - openings perfect for adding heat sinks & keeping your Pi cool
•
All cut-outs for each interface are pre-cut into the acrylic frame
•
Allows easy access to Power, Video, Audio, USB, LAN, SD card
•
Prepared to connect a Raspberry Pi
•
Holds Raspberry Pi firmly in place
Package content
IB-RP101, 3 sets of screws, heatsink, foot
pads, QIG
Assembly
Please follow the drawing to assemble the
Raspberry Pi board to the IB-RP101.
Screws A
Should be used for fixing the aluminium top.
Screws B
Should be used for standard assembly.
Screws C
Should be used, if you want to connect the
IB-RP101 to a Raspberry Pi
(longer thread).
© Copyright 2016 RaidSonic Technology GmbH. All Rights Reserved.
2 and 3 - Model B (not included)
®
touch display
®
Raspberry Pi
is a trademark of the Raspberry Pi Foundation.
®
computer safe and sound in this lovely alumini-
®
touch display
®
Screw A
Screw B or C
Werbung
Verwandte Anleitungen für Icy Box IB-RP101
Inhaltszusammenfassung für Icy Box IB-RP101
- Seite 1 ® • Holds Raspberry Pi firmly in place Screw A Package content IB-RP101, 3 sets of screws, heatsink, foot pads, QIG Assembly Please follow the drawing to assemble the Raspberry Pi board to the IB-RP101. Screw B or C Screws A Should be used for fixing the aluminium top.
- Seite 2 Zu Verwendung um den Aluminiumdeckel zu befestigen. Schraube B Zu Verwendung um die Standardinstallation durchzuführen. Schraube C Zu Verwendung um die IB-RP101 mit einem Raspberry Pi Touchdisplay zu verbinden ® (längeres Gewinde). © Copyright 2016 RaidSonic Technology GmbH. Alle Rechte vorbehalten.