Beper RI.504 Handbuch Seite 13

Fireplace stove Use instructions
Do not use the appliance if the glass panel is damaged or broken.
Use and operation
To turn the appliance on, plug it to a wall socket, and select one of the functions here by described by pressing
the switch buttons found on the side of the appliance:
•For flame effect (no heating function): place the LAMP switch on "I"
•For low heating mode: turn on switch " I "
•For high heating mode: turn on switch "I" and "II"
Note: for high heating mode, both "I" and "II" switched must be on
For temperature adjustment: rotate the thermostat knob towards left ("Min") to lower temperature, or towards
right ("Max") to increase temperature
Note: thanks to its automatic operation, thermostat will maintain selected temperature
Cleaning and maintenance
Before carrying out any cleaning or maintenance operation, turn the appliance off, unplug it from wall socket and
allow it to completely cool down.
Clean the outer part of the appliance with a soft, slightly damp cloth.
Do not use detergents or polishing products.
Technical data
Power: 1750-1950W
Power supply: 220-240V ~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
13
EN