Leatt GPX Anleitung Seite 3

HELMET DESIGNED AND INTENDED FOR USE ONLY IN NON-
AUTOMOTIVE MOTOR SPORTS. NO HELMET CAN PROTECT
AGAINST ALL POSSIBLE IMPACTS. SERIOUS INJURY OR DEATH
CAN OCCUR EVEN WHEN WEARING THIS HELMET. FOR ADEQUATE
PROTECTION, THIS HELMET MUST FIT CLOSELY AND BE SECURELY
FASTENED. ANY HELMET SUSTAINING A VIOLENT IMPACT
SHOULD BE
MAY BE SEVERELY REDUCED BY THE APPLICATION OF PAINT,
ADHESIVE STICKERS OR TRANSFERS, CLEANING FLUIDS OR
OTHER SOLVENTS. SHELL AND LINER CONSTRUCTED OF CARBON,
ARAMID, GLASS FIBRES WITH EPOXY RESIN AND EXPANDED
POLYSTYRENES.
BY THE HELMET MANUFACTURER. READ AND FOLLOW ALL
INSTRUCTIONS IN OWNER'S MANUAL.
INSTRUCTIONS
Do not make any modifications to the Helmet, this includes the outer shell,
the inner EPS liner or chin strap, any and all modifications will void all
warranties and affect the Helmet's performance.
The helmet is suitable for use with goggles.
The liner is essential to the intended performance of the helmet.
The helmet has a limited lifespan in use and should be replaced when it
shows obvious signs of wear, e.g. change of fit, cracks, rust or fraying.
The Leatt ® GPX Helmet forms part of the protective equipment ensemble
available for use by participants in motorcycling activities. Always perform
any motor sport activity with caution and use/wear appropriate safety
equipment.
1
WARNING
REPLACED.
USE ONLY
THE PROTECTION OF THIS HELMET
MATERIALS RECOMMENDED
Copyright © 2015, Leatt Corporation
®