Daily Cleaning; Cleaning For Prolonged Deactivation; Cleaning For Replacing Lava Stones - CookMax CXGPL477G Handbuch

4.
ROUTINE MAINTENANCE

Daily cleaning

Wait for the temperature of the grill to cool off so that the operator is not burnt.
Do not use pressurized or direct water jets.
1- Lift the cooking grills, and using a sponge, clean the entire surface thoroughly with
soapy lukewarm water.
2- Rinse the parts and carefully dry all the surfaces using non-abrasive material;
3- Remove, if necessary (see unloading oil/ash) collection container, empty it and wash
it. Afterwards dry it
thoroughly and put it back in place.
4- Carefully reposition all of the parts removed in their housing, making sure not to invert
the assembly sequence.
If necessary, repeat the operations described above for a new cleaning cycle.
GRILLS:
Use a sponge and neutral detergent liquid to remove incrustations. Clean the grills with a
moist cloth. If necessary turn the appliance on to dry it (See Daily activation).

Cleaning for prolonged deactivation

In the event of prolonged inactivity, carry out the procedure described in daily cleaning
and protect the parts more exposed to oxidation as described hereafter.
Therefore:
• Pass over all the stainless steel surfaces using a non-abrasive cloth slightly moistened
with Vaseline to create a protective coating.
Air out the appliances and rooms regularly.

Cleaning for replacing lava stones

When replacing the lava stones due to wear, you must:
• Wait for the temperature of the hotplate to cool off so that the operator is not burnt.
• Carry out the procedure described in "replacing lava stone" (see 3. Instructions
use)
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 14 - 14