Denver MRD-51 Bedienungsanleitung Seite 7

17. MENU
18. EQ
19. PRESET
20. TIMER
REMOTE BATTERY INSTALLATION
The infrared remote control requires 2 PCS UM-4 R03, AAA (3V) Battery
POWER ON/OFF
1. Press POWER to turn the system on. The power indicator lights up.
2. Press the function selector buttons (DAB/FM/CD/USB/TAPE/PHONO/AUX IN) to select the desired
function.
3. Start to adjust the volume by using the volume control button.
4. When finished listening press POWER again to turn off the system. The power indicator goes off.
Remark: The unit is comply with ERP2, the unit will turn to Standby mode if there is no operation on the
unit after 15 mins, please press POWER button 2 times if you want to re-start the unit.
DAB MODE
Press function button (10) (5 on remote) repeatedly to select DAB mode. Press SKIP+/- (16/15) (12/13 on
remote) to search the program
DAB MENU
Press MENU (21) (17 on remote) to access to the options.
1. Full Scan: select this option to perform a full scan of the available DAB programs. You can press SCAN (23)
to perform the same action.
2. Manual Tune: select this option to select manually the DAB frequency
3. DRC: select this option to choose between DRC low, DRC high and DRC off.
4. Prune: select this option to choose between PRUNE stations on or off.
DAB PRESET
You can program a maximum of 20 preset radio stations.
1. Press and hold PRESET (24) (19 on remote). PRESET STORE will appear on display. Press SKIP+/- (16/15)
(12/13 on remote) to select the preset number. Press ENTER (9) (16 on remote) to confirm.
2. Press PRESET (24) (19 on remote) to navigate through the presets.
DAB INFO
Repeatedly press INFO (22) (18 on remote) to see the following information: NAME/KBPS/DATE /TIME.
FM MODE
Press function button (10) (5 on remote) repeatedly to select FM mode. Turn the TUNING KNOB (27) to
manually select the frequency