Team Orion Carbon LiFe Installation

Traxxas® TRX® High Current Connectors US Patent Nos. 7,374,460, 7,530,855,
D573,536 and D576,557; Traxxas and TRX are registered trademarks of Traxxas, L.P.
Installing the battery
The Team Orion Carbon LiFe high performance LiFe
battery capacity is maximized thanks to it's revolutio-
nary shape which fills up all the available space in the
battery compartment. Please follow these instructions
to install your Team Orion Carbon LiFe batteries.
Please read the charging instructions on the back
of this page.
The installation of your Team Orion Carbon LiFe bat-
teries requires that you remove certain parts located
inside the battery compartments.
Remove the following parts from the battery compartment,
(1) foam , (2) pressure spring and (3) battery holder.
Battery tray with all parts removed and ready to accept
your Team Orion Carbon LiFe battery.
Slide the battery inside the battery compartment with
the wires facing outwards and to the back of the car.
Fold the balancing connector wires and place the con-
nector (white plastic) inside the battery compartment
remaining space. Route the power wires through the
opening and close the compartment making sure that
the wires are not pinched.
2010 © Team Orion