Instructions; Connections - Xiaomi Mi XMMNTWQ34 Handbuch

Instructions

Connections

1. Connecting the DisplayPort cable (only when using DisplayPort).
a. Make sure the monitor and the computer are both turned off.
b. Connect one end of the DisplayPort cable to the computer's DisplayPort output port, and the other end
to one of the monitor's DisplayPort input ports.
2. Connecting the HDMI cable (sold separately) (only when using HDMI).
a. Make sure the monitor and the computer are both turned off.
b. Connect one end of the HDMI cable to the computer's HDMI output port, and the other end to one of the
monitor's HDMI input ports.
3. Connect a headset or any 3.5 mm compatible external audio device to the monitor's audio output port.
4. Plug both the power cords of the computer and the monitor into a power outlet.
Note: If the power cord or DisplayPort cable is damaged, it must be replaced with a genuine power cord
or DisplayPort cable purchased from the manufacturer or a er-sales service department.
HDMI Cable
(sold separately)
DisplayPort Cable
Note: The audio output port can only be used for audio output.
DisplayPort (1.4): 3440 × 1440, max. refresh rate 144 Hz.
HDMI (2.0): 3440 × 1440, max. refresh rate 100 Hz.
6
HDMI 1 HDMI 2 DP 1
(HDMI 2.0) (HDMI 2.0)
(DP 1.4)
DP 2
AUDIO AC IN
(DP 1.4)
Note: This plug fits only into
a grounded electrical outlet.
AC Power Cord