Removing The Cover - Renolux Spirit Anleitung

INSTALLING the TOY ARCH
Take hold of the ends of the arch and insert
them into the holes in the frame of the
backrest (1).
Set to the desired angle.

REMOVING the COVER

1. Release the 2 small straps (A) on
either side of the base of the seat.
2. Disconnect the straps (B).
3. Detach the 2 press studs inside the
cover (C).
4. Place the cradle in an upright
position.
5. Remove the cover, starting at the
foot end.
To put the cover back on, repeat the
process in reverse.
RENOLUX FRANCE INDUSTRIE guarantees this cradle for 2 years
from purchase date. The Renolux Company is not responsible for any damage resulting from
use other than that which is described in the manufacturer's instructions.
All complaints should be referred to the store where purchased along with this
(2)
GUARANTEE
warranty and original sales slip
RENOLUX FRANCE INDUSTRIE
ZI - Montbertrand
38230 CHARVIEU FRANCE
© Sophie la girafe. Tous droits réservés
(1)
A
B
8