ICS Schneider Messtechnik P 700 T Betriebsanleitung Seite 37

P 700 T
Cleaning:
Clean the P 700 T with a dry or slightly damp lint-free cloth.
Do not use sharp objects or aggressive cleaning agents to clean the P 700 T. Avoid contact
with aggressive media.
Storage and transport:
For storage and transportation we recommend our transportation case, which is available as
an accessory.
Only carry the P 700 T on the hand lever, the reservoir or the base plate. Hoses or other com-
ponents are not suitable for this purpose.
The tight-fitting rigid foam inlay offers optimum protection for the P 700 T with pressure hose
and accessories.
REFERENCE / REFERENCE GAUGE
The common reference models fit into the gaps in the transportation case and do not
need to be removed.
Before storage, we recommend that you consider the following points:
 Clean the P 700 T and the accessories.
 Turn the fine adjustment valve clockwise until the thread is
no longer visible ( illustration).
 Open the pressure relief valve.
Verify that the seal of the reservoir is in the "C L O S E" po-

sition!
IMPORTANT! Do not store under pressure!
Only store the hand pump with the pressure relief valve open.
This ensures that no pressure can be built up by unintentional pumping movements.
Technical changes reserved
Maintenance / cleaning, storage and transport
- 37 -