Before First Use; Filling The Water Tank - nedis KAWD300FBK Kurzanleitung

•
Do not expose the product to direct sunlight, naked flames or heat.
•
Never immerse the product in water or place it in a dishwasher.
•
Do not remove the top lid while the brewing cycle is in progress.
•
Unplug the product when not in use and before cleaning.
•
Unplug the product from the power source before service and when
replacing parts.
•
Children of less than 8 years should be kept away unless continuously
supervised.
•
Usage by children should be supervised at all times.
•
This product is not a toy. Never allow children or pets to play with this
product.
•
Do not move the product during operation.
•
The temperature of accessible surfaces may be high when the product is
operating.
•
Do not touch the hot parts of the product directly.
•
Do not fill the water tank below the "min" indicator.
•
Do not fill the water tank above the "max" indicator.

Before first use

1. Clean the product with a damp cloth.
2. Place the product on a stable and flat surface.
3. Connect the power cable A
When you first use this product, perform two full cycles to clean the inside
-
of the product.

Filling the water tank

1. Remove the top lid A
7
2. Fill A to the "max" on the water level indicator A
Do not fill the water tank above the "max" on A
-
Do not fill the water tank below the "min" on A
-
- Do not spill any water on the product.
6
3. Place A back on A
9
to a power outlet.
6
from the water tank A
7
.
6
7
.
8
.
8
.
8
.