Herunterladen Inhalt Inhalt Diese Seite drucken

How To Start Up The Appliance; Starting Up The Appliance; Residual Heat Indication; Limitation Of Operating Time - Rommelsbacher F 1200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Bouillon fondue – besides beef, pork or chicken, also vegetables like caulifl ower, broccoli,
pepper, zucchini or mushrooms are suitable to be cooked in bouillon.
Fat/oil fondue – particularly suitable for cooking in fat is beef, pork or chicken.
For the function "Fondue", a temperature of approx. 170 °C is preset.
The temperature may be modifi ed individually with the touch keys "+" resp. "-".
approx. 150 °C

Starting up the appliance

CAUTION: Hazard of injury and burns!
• Base unit, fondue pot, pot contents and other accessory
parts are getting hot during operation!
• Hot surfaces are initially still hot, even after switch-off!
• Take care when handling hot fat and oil!
Depending on the quantity and texture of the food to be heated as well as on the set temperature, the
appliance requires 15-30 minutes for heating-up. Therefore we recommend to start the preparations in
good time prior to serving the fondue.

Residual heat indication

The appliance is equipped with a residual heat indication. It shows whether the heating plate may be
eventually still hot.
• If the temperature on the cooking zone has reached a value of more than 60 °C due to the waste heat
emitted by the pot, the pilot lamp in the middle of the tempeature scale lights up continuously.
• If the temperatures falls below 60 °C, the pilot lamp extinguishes.
NOTE: If the appliance is cut off the power supply, the pilot lamp extinguishes in any case.
Operating time limitation
• The operating time limitation will cause the unit to switch automatically in the "Standby" mode if the
settings have not been changed for a period of 3 hours. This happens independently of the respectively
set function.
• After an automatic switch-off, the unit can be switched on once again and the maximum operating time
will be active again.
Connecting the appliance to the power supply
• Plug the mains plug to a suffi ciently secured socket in order to connect the appliance with the power supply.
When laying the power cord, make sure that no one can get entangled or stumble over it in order to
avoid that the appliance is pulled down accidentally.
approx. 160 °C approx. 170 °C approx. 180 °C
approx. 190 °C
21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis