Dip Switches; Dip Switch Table - Chaovet Obey 40 Bedienungsanleitung

DIP Switches

DIP Switch Table

Page 20 of 176
The 6 DIP switches that configure D-Fi™ on the Obey™ 40 D-Fi 2.4 are shown below:
· DIP switches 1 thru 4 set the D-Fi™ channel, but DIP switch 5 must be in the ON position for DIP
switches 1 thru 4 to have any effect.
· DIP switch 5 toggles between the D-Fi™ Channel Selection modes: Auto-Sync (OFF) and
Manual (ON).
· DIP switch 6 toggles between Transmit D-Fi™ (ON) and
Receive D-Fi™ (OFF).
For a list of DIP switch combinations, see
settings table affixed to the bottom of the Obey™ 40 D-Fi 2.4.
D-Fi™ Channel
Auto-Sync Or Manual
Set the D-Fi™
Channel
DIP Switch Settings
Auto-Sync
Or Manual
Transmit Or
Receive
Receive Or
Transmit D-Fi™
Channel Selection
in this manual or the DIP switch
D-Fi™ Channel
Obey™ 40 D-Fi 2.4 User Manual Rev. 2
Auto-Sync
Or Manual
Transmit Or
Receive