Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
UK
VI. CONNECTION
VII. ATTENTION
1. Please check whether the input voltage of the constant voltage power supply is in
accordance with the controller, and please check the connection of both the cathode
and anode, otherwise the controller will be broken.
2. Please don't connect wires with power on.
Please switch on again only when it is in right connection and no short circuit.
3. Please keep your finger off the touch ring when installing the batteries, to improve its
sensitivity, and use the remote (3 seconds later) after the batteries are installed.
Please reinstall the batteries, if the touch ring is found low-sensitivity.
4. Please do not use the controller in the place with widely range metal area or strong
electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.
V+
R
G
B
W
Werbung
Inhaltsverzeichnis
