Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Press START and DOWN, and scroll pro-
grams downwards using DOWN button
Modification of processing times
Processing times can only be modified in the
actually indicated programe number:
•
Switch unit off, then on again whilst
keeping START button pressed - this ent-
ers 'Set-mode' . The program number is
displayed for two seconds, then the time
for the process step is indicated and the
'min sec' display will flash on and off
•
To check the actual programe No., press
both the UP and the DOWN button at the
same time
•
Set time by using the UP or DOWN but-
tons. The time display will scroll automati-
cally if the Up or Down button is kept
depressed
•
Set the time to 0:00 for any process steps
not required
•
To change from a 'W' (wash) to a 'CH'
(chemistry) step, press START
•
To change to the next step, press START
•
To store the time reading, press START
•
To exit SET mode: Switch unit off or com-
plete entering of all 13 steps
Note: the time is only stored in memory after
pressing START, and this must be done after
the last time entry.
15
Werbung
Kapitel
Inhaltsverzeichnis
