How To Use; How To Wear - TaoTronics BT-569MS2 PLUS Bedienungsanleitung

EN

How to Use

1. Charging
1) Connect the charging port with any USB charging adapter or
active computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns blue.
Note:
• Charge the headphones at least once every 6 months when
not using for a long time.
• Make sure the battery is fully charged before putting the
headphones away for storage.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are
next to each other (within 3 feet / 1 meter).
2) The rst time you use the headphones, press and hold the
Multifunction Button until the LED indicator ashes red and blue
alternately. Now the headphones is in pairing mode.
3) Activate Bluetooth® function on your phone and search for the
nearby Bluetooth® connection: Find "TaoTronics TT-BH070" in the
search results. Tap on the name to connect. Once connected,
only the blue LED will ash.
Note:
• The Bluetooth® headphones can remember previous paired
devices.
• If the headphones cannot pair with your Bluetooth device, press
and hold the Volume+ / - Button at the same time until the LED
Indicator ashes blue twice and 2 beep sounds are heard to
clear the pairing history. Then restart the headphones to pair
again.

How to Wear

Please wear the headphones as shown in the diagram:
1) Attach the ear hooks onto the earphones.
2) Wear the earphones and the hooks on your ears and adjust for
the best t.
01/02