Palmako EL16-1818 Montageanleitung Seite 5

Installation manual - English
1 Assembly manual
Dear client,
We are glad that you have decided in favour of our product!
Please read the assembly manual carefully before proceeding with the product installation! You will thus avoid
problems and will not waste time.
Recommendations:
➢ Keep the product package until its complete assembly in a dry place, but not in direct contact with the ground,
protected from weather conditions (moisture, the sun, etc.). Do not keep the product package in a heated room!
➢ Assemble the product on the smooth surface at least 2m from any construction or barrier such as fence, garage,
house, above situated tree branches, clotheslines and electric cables.
➢ When selecting the product location, make sure that the product will not be subjected to extreme weather conditions
(areas of strong snowfall or winds); otherwise you should attach the product (for instance, with anchors) to the
subsoil.
➢ Since the foundation joists are in constant contact with the ground, they must be treated with a special wood
preservative. Consult a specialist regarding paints suitable for unprocessed softwood and follow the paint
manufacturer's instructions.
Warranty
Your product is made from high quality fir and delivered in the natural (unprocessed) form. If, despite our thorough
inspection, you should have complaints, please submit the filled-out control sheet and purchase invoice to the product
seller.
ATTENTION: Please be sure to keep the documentation accompanying the product package! The control sheet
includes the control number of the product. We can only review complaints if you submit the control number
of the product to the seller!
The warranty does not cover:
➢ Peculiarities of wood as a natural material
➢ Wooden details already painted (processed with a wood preservative)
➢ Wooden details containing whole branches that do not endanger the stability of the product
➢ Colour tone variations caused by wood structure differences that do not influence wood lifetime
➢ Wooden details containing (caused by drying) small cracks/gaps that do not pass through and do not influence the
structure of the product
➢ Twisted wooden details if they can nevertheless be installed
➢ Roof and floor boards that may have on their concealed surfaces some non-planed areas, colour differences and
waning
➢ Complaints resulting from an incompetent manner of the installation of the product or the product subsiding due to
an incompetently made foundation
➢ Complaints caused by introducing self-initiative changes to the product, such as the deformation of wooden details
and doors/windows due to an incompetent manner of wood processing; the attachment of storm braces too rigidly,
doorframes being screwed onto wall logs, etc.
The complaints covered by the warranty are satisfied to the extent of replacing the deficient/faulty material. All
other demands will be excluded!