nordholm Stick Gebrauchsanweisung Seite 7

3. Contents
Towel warmer content includes:
4. Installation
For the correct installation of towel warmers it is essential that the fixing of the towel warmer is carried
out in such a way that it is suitable for intended use AND predictable misuse. A number of elements need
to be taken into consideration including the fixing method used to secure the towel warmer to the wall,
the type and condition of the wall itself, and any additional potential forces or weights, prior to finalising
installation. The fixing materials provided are only intended for installation on walls made of solid wood,
bricks, concrete or on timber-frame stud walls where the fixing is directly into the timber. All walls being
considered should have no more than a maximum of 3 mm wall finishing. For walls made of other mate-
rials, for example hollow bricks; please consult your installer and/or specialist supplier.
IN ALL CASES IT IS STRONGLY RECOMMENDED THAT A SUITABLY QUALIFIED PRO-
!
FESSIONAL INSTALLER OR SIMILAR TRADESPERSON CARRIES OUT THE INSTAL-
LATION.
1. Scaffolding construction
2. Plasterboard and coating
3. Hub
4. Grub screw M5
5. Hidden connection
6. Cable
7. Anchor bolts
8. Bracket hub
7
9. Screw
10. Leg
11. Grub screw M8
12. Hex wrench